SIMENA: Inside ARES Yachts’ 62m Ketch with Hybrid Propulsion
Classic lines, a four-sail wardrobe and a propulsion system that can generate electricity under sail define the Turkish-built flagship.
The 62-metre SIMENA sailing yacht brings a clipper bow and a traditional ketch silhouette to a project built around modern sail handling and hybrid propulsion. Constructed by ARES Yachts in Antalya, with exterior design and naval architecture by Taka Yacht Design and interiors by Design Unlimited, she combines a steel hull with a lightweight composite superstructure.
Her sailing figures give some substance to that combination. ARES reports that SIMENA reached 16 knots in 20 knots of wind during sea trials, at a stated wind angle of 100 degrees. During a separate photography session off Saint-Tropez, the yard reported speeds of 8.5 to 9.5 knots in 13 to 16 knots of wind.
Behind that traditional appearance, powered sail handling and a hybrid propulsion installation support a range of sailing and motoring modes.
A ketch rig with four principal sails
SIMENA’s mainmast rises 59 metres above the waterline, with the mizzen reaching 48 metres. Doyle supplied the sail wardrobe: a 470-square-metre mainsail, a 249-square-metre mizzen, a 596-square-metre genoa and a 356-square-metre staysail.
Dividing the sail plan between two masts gives the crew several options for adjusting the balance and amount of canvas to suit conditions. The headsails also contribute to SIMENA’s distinctive profile, extending forward towards the bowsprit.
Sail handling relies on seven captive winches concealed below deck, together with custom Antal winches. The arrangement brings powered control to a rig whose individual sails are substantial even by large cruising-yacht standards.
According to ARES, SIMENA covered approximately 3,250 nautical miles during the opening part of her first Mediterranean season, including a non-stop passage of around 1,200 nautical miles from Fethiye to Monaco.

Steel construction beneath a classic profile
Taka Yacht Design developed SIMENA’s exterior around a sweeping sheerline, clipper bow and relatively modest overhangs. Varnished mahogany and teak reinforce the connection with traditional yacht design.
Below that styling, the construction pairs an AH36 steel hull with a glass- and carbon-fibre composite superstructure. Keeping weight down above deck was part of the design approach to lowering the centre of gravity. The steel hull and composite superstructure were already central to the design details unveiled during SIMENA’s construction.
SIMENA has a 49.40-metre waterline length, a full-load draught of 4.72 metres and a fixed keel with 90 tonnes of ballast. Full-load displacement is 570 tonnes, with a gross tonnage of 499 GT.
A recessed flybridge helps preserve the low outline of the deckhouse. It provides another outdoor seating area without adding a prominent upper deck to the yacht’s silhouette.

How SIMENA’s hybrid propulsion works
The propulsion installation combines a MAN diesel engine, three CAT generators and a 220kW electric machine. Its purpose is to offer several operating modes for propulsion and onboard electricity.
In electric propulsion mode, the generators supply the electric motor. This allows lower-noise operation without using the main engine to drive the propeller, but it remains generator-powered cruising.
ARES quotes an electric cruising speed of approximately 8 knots and a calculated range of around 6,000 nautical miles in this mode.
For conventional motoring, ARES quotes a maximum speed of 14 knots and a range of 4,000 nautical miles at 11 knots. The main engine can also provide propulsion while a power take-off arrangement supplies electricity for onboard systems.
Under sail, the installation offers another possibility: hydro-regeneration. Water flowing past the propeller turns the system to generate electrical power. According to ARES, hydro-regeneration becomes available from around 7 knots of boat speed. The amount of electricity generated depends on sailing conditions and boat speed; no output figures have been disclosed.
Outdoor spaces and interiors by Design Unlimited
The aft cockpit forms the main outdoor gathering space, with two mahogany tables that can be joined for dining for up to 14 people. A bar, grill and pantry serve the area, while a circular Jacuzzi and raised sunpads occupy the aft deck.
A six-square-metre platform folds out from the starboard side near the waterline. Designed for boarding from the tender, it also provides access to the sea. A separate lounge sits forward, between the wheelhouse and mainmast.
Inside, Design Unlimited continues the exterior’s traditional references through timber joinery, brass detailing and pale upholstery. Custom furniture and Turkish stone in the bathrooms give the accommodation a more individual character.
SIMENA accommodates up to 12 guests in six cabins, including a forward owner’s suite.

SIMENA specifications
| Item | Specification |
|---|---|
| Builder | ARES Yachts, Antalya, Türkiye |
| Exterior design and naval architecture | Taka Yacht Design |
| Interior design | Design Unlimited |
| Length overall, including bowsprit | 62.00m |
| Length overall, excluding bowsprit | 58.38m |
| Waterline length | 49.40m |
| Maximum beam | 11.10m |
| Full-load draught | 4.72m |
| Full-load displacement | 570 tonnes |
| Gross tonnage | 499 GT |
| Construction | Steel hull; composite superstructure |
| Rig | Ketch |
| Sails | Doyle |
| Electric machine | 220kW |
| Maximum speed under power | 14 knots, according to ARES |
| Reported sea-trial speed under sail | 16 knots in 20 knots of wind |
| Guest accommodation | Up to 12 guests in six cabins |
| Classification | RINA, unrestricted navigation with rig certification |
Sail Universe previously covered Northrop & Johnson’s appointment for the sale of SIMENA while the yacht was under construction. The completed yacht brings together a traditional ketch rig, powered sail handling and several propulsion modes designed to support long-distance cruising.
Photography: Jeff Brown / Breed Media.